Fibre Patch Panels - Sliding
-
CommScope Fibre Patch Panels - Sliding
-
Draka Fibre Patch Panels - Sliding
-
HellermannTyton Fibre Patch Panels - Sliding
-
LANmark-OF Fibre Unloaded Patch Panels
-
Molex Lightband Fibre Panel Adapter Plates
-
Molex Lightband Multi-Function Fibre Patch Panels
-
Molex Utility Patch Panels
-
NETCONNECT Fibre Patch Panels - Sliding
-
Ultima Fibre Patch Panels FC
-
Ultima Fibre Patch Panels LC
-
Ultima Fibre Patch Panels LC/APC
-
Ultima Fibre Patch Panels SC
-
Ultima Fibre Patch Panels SC/APC
-
Ultima Fibre Patch Panels ST
FAQs
Both designs provide access to the internal fibre terminations by bringing the tray forward. A roller sliding drawer uses a guided roller mechanism, while other sliding panels may use rails or a simpler tray arrangement. Compare the opening method, retention features and internal layout required for the installation.
Leave enough controlled slack for the drawer to complete its intended travel without pulling on splices, pigtails or cable glands. The precise allowance depends on the panel design. Route the fibres through the internal management points and avoid tight coils that could exceed the cable’s minimum bend radius.
Do not assume every sliding panel can be opened safely during live operation. Patch leads and internal fibres must have sufficient movement allowance, and opening the drawer must not place tension on active connectors. Follow the manufacturer’s instructions and use a maintenance window whenever disturbance could interrupt critical circuits.
A 2U sliding fibre patch panel may be preferable when higher port capacity or additional internal working space is required. Netceed’s range includes 1U options for compact installations and 2U models supporting configurations such as 96-way connectivity. Check port density, splice space and available rack units before choosing.